- Type: Auto Meter Reading Module with Modbus/RS485 communications for 1 water meter with Pulse Output (DAE AS series,MJ series, V Series, VM Series and WP Series).
- The accessories (not included in the listing) are the power adapter (output 15V DC, input 120V AC), Din rail (to install AMR130A to the wall). We suggest that UL2464 cable be used to connect AMR130A and Water Meters. All of them are readily available in the market. You can also find them at accessories in DAE Controls Website. For 20m (66 feet) of UL2464 cable, it only costs you $12.
- AMR130A collects data from water meters and send them to remote host through RS485 with third party software
- Display: 6-digit LED display
- Indoor use only, DAE watertight NEMA 4 enclosure is available for outdoor use.
- Communication: Modbus/RTU protocol, RS485 interface, 8/n/1
- Auxiliary Power: DC 15V
- Operating Temperature: -40 to 70˚C (-40 to 158˚F)
- Operating Humidity: 0 to 90% RH (non-condensing)
- Settable Parameters: Address 0~254; Baud Rate 1200, 2400, 4800, 9600 bps; Decimal Places: 0, 0.0, 0.00; Pulse Divider: 1, 4, 8, 10, 16, 32, 64
- Mount: Din Rail.
- Non-volatile memory retains metering data during power failure
- The suggested UL2464 shielded twisted cable from the water meter to the AMR130 can be extended up to 328 feet (100 meters)
- Setup using the on-board function key.
- Optional rechargeable battery for continued operation even during a power failure.
- 2 years warranty from the seller and manufacturer.
Add a review
DAE AMR130A Auto Meter Reading Module with Modbus/RS485 Communications for 1 Water Meter
Your review
* Review is required
Name
* Name is required
Email
* Email is required
Add photos or video to your review
* Please tick the checkbox to proceed
100%
0%
0%
0%
0%
1-5 of 8 reviews
Easy to set up , works great!
Great products and great support. I reached out to support for an issue with the RS485 serial protocol. Ended up being a software problem on my side. Support was great through email and sms. I would buy again from this vendor!
“Arthur, it’s been a pleasure working with you on your project with 1 DAE AMR130A (Controls Module for 1 water meter with Modbus RTU/RS485 Communication), 1 DAE MJ-100 (1″” NSF61 Non Lead Potable Water Meter) to read the metering data with your device (Raspberry Pi with a RS-485 Hat ) through Modbus RTU/RS485 Communication.
Thanks! Mike, DAE Controls LLC, 248 635 3708″
Excellent from top to bottom !
We strongly recommend this company for his service and prompt attention.
“Paul, Thank you for your Resale Certificate of Florida. It’s been a pleasure working with you (the Owner of PASE (Pacific Atlantic Suppliers Enterprises) Inc. Miami, FL) to choose the right water meters and control device for your customer’s projects. With DAE AMR-130, your customer will be able to collect the water usage through Modbus/RTU protocol.
2 PD-75 Lead Free NSF61, IP68 Positive Displacement Water Meter, 3/4″” NPT Couplings, Pulse Output, Gallon
3 PD-100 1″” Lead Free NSF61, IP68 Positive Displacement Water Meter, 1″” NPT Couplings, Pulse Output, Gallon
1 MJ-100 1″” NSF61 Lead Free Potable Water Meter, Pulse Output +Couplings, Gallons
1 MJ-200c 2″” NTEP, IP68, NSF61 Lead Free Potable Water Meter, Pulse Output + Couplings, Gallons
1 WP-300m 3″” Woltmann Helix Water Meter, Pulse Output, Cubic meter
1 AMR-130 Auto Meter Reading Module with Modbus/RS485Communications for 1 Water Meter
Thanks! Marcus, DAE Controls LLC, 248 635 3708″
thus far, customer service has been EXTREMELY communicative and responsive.
Hi Gadi, it’s been a pleassure working with you on the metering with 1 DAE AMR KIT and 6 water meters including 3 DAE VM150P, 1 VM75P, to integrate via modbus to your BMS system that is utilizing ABB PLC controllers to understand evaporation rates for large colling uints. Thanks! Marcus