- Type: Measured in cubic feet, National NTEP approval, NSF61 Certified, Lead-Free Potable Water Meter, 3/4″ NPT Couplings at both ends, with Pulse/Reed Switch Output, Multi-Jet.
- Model: DAE MJ-75f
- Unit: cubic feet
- Accuracy: +/-1.5% within normal flow rate range as per AWWA Standard
- Pulse output: 0.01 cu ft/pulse, a dry contact (i.e. no voltage) reed switch with 2 wires, 1.5m. The switch may be damaged if input electricity is more than 0.01A, 24V. We shall not be responsible with the result if connecting to third party device which is not certified by DAE.
- Meter body: NSF61 Certified Lead-Free Bronze
- Length without couplings: 190 mm (7.5 inches), Length with couplings: 292 mm (11.5 inches)
- Item dimension: 190 mm (7.5″) length, 94 mm (3.7″) wide, 107 mm (4.23″) height. Weight: 1.65 kg (3 lbs 10 once)
- NSF61 Certified Lead Free Couplings Included
- Max. Reading: 999,999.999 cu ft, Min. Reading: 0.001 cu ft. The 1st digit from the right has a multiplier of 10 cu ft. For example, if you see 01234 on the digits, it is 12340 cu ft. The 1st dial under the digits is in cu ft . The 2nd dial under the digits has a multiplier of 0.1 cu ft.
- Max. working pressure: 1.6 Mpa (232 psi), exceeding the requirement from AWWA standard 150 psi.
- Max temperature: 122˚F (50˚C)
- Pressure drop: 0.58 psi @ 40.1 cu ft/h (5 GPM), 1.96 psi @ 80.21 cu ft/h (10 GPM)
- Conforms to ISO 4064, AWWA C708, for clean water only.
- Safe Maximum Flow Rate: 160.42 cu ft/h (20 GPM), Recommended Maximum Continuous Flow Rate: 80.21 cu ft/h (10 GPM), Minimum Test Flow Rate: 2.01 cu ft/h (0.25 GPM), Normal Test Flow Limits: 8.02 – 160.42 cu ft/h (1-20 GPM)
- Bore diameter: 0.88 inch (22.3mm)
- For the buyers outside of USA, in addition to the tax, the carriers may charge brokerage fee.
3/4 in, MJ Series, Water Meters
DAE MJ-75f NTEP NSF61 Lead Free Potable Water Meter, 3/4″ NPT Couplings, Cubic Feet, Pulse Output
$81.95
| 1/2" | 3/4" | 1" | 1-1/2" | 2" | |
|---|---|---|---|---|---|
| Cold, Gallon | MJ-50 | MJ-75 | MJ-100 | MJ-150 | MJ-200 |
| Cold, Gallon, NTEP | MJ-50n | MJ-75n | MJ-100n | MJ-150n | MJ-200n |
| Cold, Gallon, NTEP, IP68 | MJ-50c | MJ-75c | MJ-100c | MJ-150c | MJ-200c |
| Cold, Cu ft, NTEP | MJ-50f | MJ-75f | MJ-100f | MJ-150f | MJ-200f |
| Hot, Gallon | MJ-50R | MJ-75R | MJ-100R | MJ-150R | MJ-200R |
| Cold, Cu m | MJ-50m | MJ-75m | MJ-100m | MJ-150m | MJ-200m |
| Cold, Gallon, Stainless | MJS-200 | ||||
| Cold, Gallon, Encode, IP68 | MJ-75z | MJ-100z | |||
| Cold, Gallon, Plastic | MJP-100P | MJP-150P | |||
| Cold, Gallon, Plastic, w/o pulse output |
MJP-75 | ||||
| Register, Gallon | ReMJ50 | ReMJ75 | ReMJ100 | ReMJ150 | ReMJ200 |
- National NTEP approval in accuracy, and repeatability as tested by Utah Water Research Lab. It applies to all the states including California who accepts both NTEP or CTEP. Certified by NSF to meet ANSI/NSF 61 for material safety and ANSI/NSF 372 for lead free plumbing as defined by the US Safe Drinking Water Act.
- Horizontal Inline mount with dial facing upwards. For installing vertically with water flowing upwards, please refer to DAE PD-75, which can be able to be installed in any position, vertically or horizontally, dial facing upwards or downwards or horizontally, water flowing downwards or upwards. Not for use of pit application. For outdoor use, please refer to DAE MJ-75c, PD-75.
- Cloud Metering available (2nd picture) with DAE CC2030 Gateway. CC2030 will collect water usage from DAE AMR (for 16 meters) or AMR130AN (for 1 meter) and send them to cloud server through Ethernet. With PC, cell phone, the landlords can see real time data, monthly water usage & billing reports to their tenants. If there is abnormal usage (ex. Broken piping), an email alert will be sent to your cell phone. No IT guy required. Just connect wires as per a simple picture (see video) & ready to go.
- Wireless remote reading available (3rd picture) with DAE WSC500 RF converters.
- Ready for use with CO-10 KIT or CO-10 Electronic Pulse Counter (6th picture) – An inexpensive remote reading solution. Ready for use with DAE AMR130 and AMR for remote reading (5th picture)
- Customer review from Amazon / Answered questions from Amazon
- Factory Calibration Certificates available. DAE Controls LLC is a Minority Business. Please feel free to get the NMSDC Minority Supplier Certificate from DAE Controls Website.
- We ship 3 times a day. If you order by 4pm EST Monday through Friday, we shall ship in the same day. Most of our customers will be able to receive their items in 3 business days (Continental US).
Featured Videos
|
|
▶
▶
| Weight | 3.62 lbs |
|---|---|
| Dimensions | 10 × 7 × 4.5 in |
Only logged in customers who have purchased this product may leave a review.
You may also like…
-
-
Cloud ComponentsDAE AMR130 (Auto Meter Reading Module with Modbus/RS485 Communications) for 1 Water Meter
$180.00 Add to cart -
-
-
Cloud ComponentsDAE AMR Auto Meter Reading Module, RS485, for 16 Water Meters with Pulse Output.
$480.00 Add to cart
Reviews
There are no reviews yet.